ハンドセット HC20RF

ハンドセット HC20RF

HC20RFは家庭用ベッドで使用するTWINDRIVE®システムを操作可能なハンドセットです。

HC20RFは人間工学に基づいた非常に使いやすい製品で、無線方式のためわずらわしいケーブルも不要なすっきりとしたデザインの製品です。

標準仕様でメモリー機能、バックライト、トーチ機能を備えています。

Hand Control HC20RF

ハンドセット HC20RF

オンライン・PDFでデータシートをご覧ください。

Online Magazine | PDF

Expanding Your Comfort Zone

HOMELINE カタログ

TWINDRIVE™ − ベッドにモーターシステムを設置します

Online Magazine | PDF

 

TWINDRIVE TD32/TD33 User Manual

TWINDRIVE® TD32/TD33 ユーザーマニュアル

当ユーザーマニュアルではTWINDRIVE製品のインストール方法、使い方、メンテナンス方法をご案内しております。

Online Magazine | PDF

Select Your Product:

TD1 Dual Actuator TD3 Dual Actuator

Trouble Shooting TD1


  1. The bed does not work at all
  2. My RF handset does not work
  3. My neck function does not recall correct memory function
  4. How to use the TD1 cable relief
 

The bed does not work at all



Check:
Is the mains connected to the TWINDRIVE TD1?

Try/Solution:
Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.


Check:
Are all plugs mounted correctly in the TWINDRIVE TD1?

Try/Solution:
Check all connections.


Check:
Are there any visible damages on cables?

Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your bed.

My RF handset does not work



  • The handset needs to be set up to the TWINDRIVE TD1 280 (memory) underneath the bed. Follow the instruction shown in the video or in the text below.


TD1RF 280 (with memory) - How to set up radio frequency handsets

How to set up RF handsets
1. Activate the reset key on the RFR box attached on the TD1
2. Keep the reset key activated while pressing a random button on the handset
3. If there are more handsets, keep the reset key activated and press a random button on the other handset
Your bed is now ready for use.

- Download above video: TD1RF 280 (with memory) - How to set up radio frequency handsets (28Mb .wmv-file)

Back to top.

My neck function does not recall correct memory function



  • The actuator adjusting the neck function needs to be initialized. Follow the instruction shown in the video or in the text below.

TD1RF (with memory) and LA27 – How to initialise the motor system



 How to initialise the system:

  1. Drive the LA27 to the outer position (without interruption until it stops)
  2. Release the button
  3. Drive the LA27 to the inner position (without interruption until it stops)
  4. Release the button
The system has now been initialised.

- Download above video: TD1RF (with memory) and LA27 - How to initialise the motor system (42Mb .wmv-file)

Back to top.

TD1 cable relief


By using the cable relief you avoid that the cable plug is pulled out of the TD1 which may lead to a malfunction or damage the plug.

How to use the cable relief – see video.


- Download above video: TD1 cable relief (17Mb .wmv-file)


Back to top.


 

Trouble Shooting TD3


  1. The bed does not work at all
  2. My RF handset does not work
  3. The neck function of the bed does not work, it cannot drive outwards
 

The bed does not work at all



Check:
Is the mains connected to the TWINDRIVE TD3?

Try/Solution:
Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.


Check:
Are all plugs mounted correctly in the TWINDRIVE TD3?
Try/Solution:
Check all connections. Use the cable relief on the TD3 to assure that the cable does not fall out. Follow the instruction shown in the video or in the text below.

TD3 cable relief


By using the cable relief you avoid that the mains cable plug is pulled out of the TD3 and a malfunction occurs.
How to use the cable relief – see video.

Check:
Are there any visible damages on cables?

Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your bed.

- Download above video: TD3 cable relief (14Mb .wmv-file)

Back to top.

My RF handset does not work


  • The handset needs to be set up to the TWINDRIVE TD3 underneath the bed. Follow the instruction shown in the video or in the text below.

TD3 - How to set up radio frequency handsets

How to set up RF handsets:

  1. Activate the reset key on the TD3. The bed drives to a flat position. Keep the key pressed until the motor stops completely
  2. Release the reset key
  3. Reactivate the reset key on the TD3
  4. Keep the reset key activated while pressing a random button on the handset
  5. If there are more handsets, keep the reset key activated and press a random button on the other handset

Your bed is now ready for use.

- Download above video: TD3 - How to set up radio frequency handsets (31Mb .wmv-file)

Back to top.

The neck function of the bed does not work, it cannot drive outwards



  • The actuator adjusting the neck function needs to be initialised. Follow the instruction shown in the video or in the text below.

TD3 and LA27 - How to initialise the motor system



How to initialise the system:
  1. Push the down button of the actuator
  2. Drive the actuator until it has reached the inner position and stops completely
  3. Release the key on the handset
  4. Reactivate the down key of the actuator and keep it activated for approx. 5 sec.
  5. You can now drive the actuator outwards
The system has now been initialised.

- Download above video: TD3 and LA27 - How to initialise the motor system (37Mb .wmv-file)

Back to top.

For further information please see the HOMELINE User Manuals.

関連製品

コントローラーとは
コントローラーはLINAKのアクチュエータシステムをコントロールする装置であり…
HOMELINE機器
HOMELINE機器の使用例をご覧ください。
LINAKお問い合わせ先
豊富な知識と丁寧なサポートでご要望にお答え致します。こちらからお気軽にお問い合わせください。